SP Plus Technical Specfications    | Home
SP Technical Specifications |  SP Plus Technical Specifications  |  SX II Technical Specifications  |  The Library   |  Sample Downloads   |  Samplesite CD ROM's
Tips & Tricks |  Contact  |  Links
SP Plus Technical Specfications



16-bit sample player manufactured by Peavey Electronics Corp. from 1991 to 1998.
32 note polyphony (mono samples), 16 note polyphony (stereo samples).
Sample Rate adjustable from 12 kHz. to 48 kHz.
Four outputs with full panning configurable as: two stereo pairs, two mono outs and one stereo pair, or four mono outs.
Comes standard with 2 M of memory; can be expanded to 32 M for a total of 190 sec. stereo or 380 sec. mono ( @44.1 kHz.).
Uses Macintosh 30 pin (non-parity) SIMM's ; 1,4 or 16 M (in pairs).
Loads samples via: SCSI, floppy disk, or audio from the SX / SXII.
MIDI : 16 part multi-timbrial; omni, poly, and multi modes.
MIDI In, Thru, and Out ports.
Dual 25 pin SCSI connectors, internal termination on or off via internal DIP resistor networks.
Multiple units can be cascaded to increase memory and polyphony.
200 Waves, 200 Tones, 128 Maps, 128 Presets.
Four Effects : Master 5 Band EQ, Stereo Delay, 8 voice Chorus, Reverb. Fixed serial path, assingable to Main or Sub Outs.
Architecture: Waves-Tones-Maps-Presets-Global.
Wave Parameters include: Forward Looping, Stereo Merge of two mono samples into one stereo sample,Wave naming, tuning, and copying.
Tone parameters include: DCO, DCA, and DCF (with resonance), fully assignable modulation sources,adjustable modulation polarity, three stage envelope, active filters, panning, assignable LFO, wave start modulation, Tone naming and copying.
Map parameters include: zone width, tone assign, transposition, volume, pan, output assign, 8 voice allocation groups, Map naming and copying.
Preset parameters include: controller assignments, Map layering, detuning, crossfading, velocity switching, range switching, maximum polyphony, voice allocation, pitch bend and transpose amounts, master DCF, DCA, pan and filter cutoff, Effects editing and send amounts, Preset naming and copying.
Global parameters include: MIDI receive mode, Multi mode edit, SCSI parameters, Master Tuning and Volume, Note and Display options.
Supports SMDI (SCSI Musical Data Interchange).
Reads Akai S-1000 data (via SCSI only) .

Pros:

Clean sound, expandable to 32 M, easy to edit, 8-way velocity switching, reads Akai S-1000 data, inexpensive, separate sampling and playback units, SCSI, SMDI, one rack space, active resonant filters, 32 note polyphony, effects.

Cons:
Only reads Akai S-1000 data, only supports forward looping, four outputs, no sample reverse, effects are Globally applied to each Preset in a fixed, serial path (not separately addressable) and cannot be split up between Main and Sub outputs, maximum 278 ms. Delay time.

Current Street Value:

$100.00 - $200.00 US